|
Riverport Technologies is your best source for OKI wire. OKI wire is available in two different tempers: High-tensile and Half-Hard. The High-tensile wire (OKI type "P") works extremely well on Automatic Wire Threading (AWT) machines and provides a fine surface finish. Some of its unique qualities are straightness, cleanliness, uniformity and packaging. The Half-hard wire (OKI type "B") is ideal for use on machines that run low tension on the wire and when taper cutting is required.
|
 |
Wire Specifications:
| ... | OKI "P" | OKI "B" |
|---|---|---|
| Tensile strength (psi) | 120,000 | 70,000 |
| Tensile strength (N/MM2) | 835 | 487 |
| Base material | 65% copper 35% zinc | 65% copper 35% zinc |
| Elongation | 3% max. | 3% max. |
| Conductivity IACS | 23% | 23% |
| Color | Gold | Gold |
| Diameter tolerance | +/-1 Micron (.001 mm) | +/-1 Micron (.001mm) |
Wire diameter availability (in inches):
.004,.006,.008,.010,.012,.013,.014,.008,.010,.012OKI wires are available on a wide variety of spools (P3, P5, P10, P20 & DIN200)
Call Toll Free (888) 771-3336
Fax (630) 427-1633
EMail Us by clicking here